conseal CS 90 fuel resistant epoxy coating | 48WS

Ecommerce Websites, Catalogs, and Marketing Services

We Do Not Sell Products

 
 
BROWSE CATEGORIES
 

Search:

Fuel Resistant Epoxy Coating

CS-90

ConSeal

Installation aid for bonding preformed sealants in wet conditions or frozen concrete structures.
(click image to enlarge)
Quick Overview
    Interested in this item or want more information?
    Call Mon. through Fri. 8:00 AM - 5:00 PM PST
    Phone: 714-573-4083
    Email: sales@48ws.com

    Can't find what you want? Give us a call and we can help you find it.
    Details
    • SEALING PROPERTIES
    • CS-90 Fuel Resistant Epoxy System is a two-part epoxy paint system, which produces a hard polymer film that protects concrete from penetration when exposed to hydrocarbons and some chemicals.
    • PHYSICAL PROPERTIES
    • COLOR: Blue Tint (opaque when wet, transparent when dry)
    • % SOLIDS: 40%
    • SOLVENT TYPE: Water Based with a co-solvent
    • FLASH POINT: Part A: >212°F(100°C); Part B: >212°F(100°C)
    • WEIGHT / GALLON: 8.8 lbs
    • APPLICATION TEMP. RANGE: 50°F to 110°F (7°C to 48°C) ambient and/or Surface Temperature
    • MOISTURE / HUMIDITY: Avoid humidity of greater than 80% RH. The concrete temperature must be a minimum of 5°F greater than the dew point temperature. The surface of the concrete must be dry.
    • POT LIFE: 4-hour usable work life after mixed @ 72°F (22°C). Product should remain glossy when applied. If gloss diminishes, product application should be discontinued.
    • CURE TIME: Tack free: 60-75 minutes @ 72°F (22°C). In Service: 48 hours minimum
    • COVERAGE PER GALLON: Approx. 300 sq ft on wet cast concrete
    • MIXING INSTRUCTIONS: Mix Part A and Part B individually and then add contents of Part B to Part A. Mix well until a uniform light blue color is homogenously seen throughout the container. For applications requiring less than one gallon, consult Concrete Sealants technical staff for appropriate instructions.
    • COATS: 2-3 coats minimum preferred. Each coat will be approximately 2 mil dry film thickness @ 300 ft2 per gallon.
    Additional Information
    Manufacturer: ConSeal
    For More Information on the Fuel Resistant Epoxy Coating, [Click Here] to Link to Manufacturer Web Site
     
    Facebook LinkedIn YouTube
     
    © 48WS®.com LLC. All Rights Reserved
     
    Powered by 48WS.com