The Bullet pumps are ideal for dewatering constructions sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.

(click image to enlarge)

Quick Overview

Mopping up after flooding is made easy with the model R400D. The Mop-up® features a unique non-return valve built in below the impeller. The rubber clad bottom helps protect against damage to floor surfaces. Pumping down to 1/12 of an inch and starts up in only a small puddle of liquid, and features a special diaphragm valve that prevents water backflow. Perfect for easy clean up of floods, and spills in basements, businesses, industrial and recreation areas.

Recommended accessories

Piggy Back type float switch (115 Volt w/ plug):

30’ Cable, 115 Volt = BJM Item # 201050
50’ Cable, 115 Volt = BJM Item # 201060

Side Mount Vertical Rod Type Float Switch:

30’ Cable, 115 Volt = BJM Item # 201051

Built-In Switch (Permanently attached to pump):

33’ Cable (115 or 230 Volt) = BJM Item # 201724
50’ Cable (115 or 230 Volt) = BJM Item # 201725

Manual Starter Box:

Manual On/Off starter box for R400D-115 = BJM Item # 201109

Auto Starter Box:

Auto On/Off starter box for R400D-115 = BJM Item # 201110

Simplex Control Panel - (3 mechanical float switches):

Single Phase Control Panel for R400D-115 = BJM Item # 201069

Duplex Control Panel - (4 mechanical float switches):

Single Phase Control Panel for R400D-115 = BJM Item # 201074

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

GENERAL DATA

Max. Flow: Gpm: 50
Max. Head: Ft: 36"
Pump Type: Top Discharge, Dewatering
Strainer Opening: N/A
Discharge Size: 2' NPT-M
Max. Submerged Depth: 65'
Shipping Weight:Lbs: 33

CONSTRUCTION/MATERIAL DATA

Motor Casing: 304SS
Pump Volute: Cast Iron
Impeller-Multi Vane: FG Reinf. Plastic
Lip Seals &0-Rings: Buna-N
Rotor Shaft: 304 SS
External Hardware: 304 SS
Oty. Oil In Seal Chamber: 1.35 U.S. FLOZ.

ELECTRICAL/MOTOR DATA

Motor Rating: Hp: 0.5
Motor Rpm: 3450
Motor Insulation Cuss: F
Motor Service Factor: 1.1
Voltage: 115,1PH-60HZ
Current F.La: 7.6
Motor Protection: Thermal Breaker
Power Cord: Gage; Length: A.W.G. 16/3; 33', STOW
Maximum Liquid Temperature: 104° F
Seal Minder: Not Available

The Bullet pumps are ideal for dewatering constructions sites, mines, circulating fountain water, or for all around use in industrial plants and utilities.

Top Discharge – allows for superior cooling of motor and provides a slim line design.
Longer Power Cord – Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic*. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components*.
R400D Special Feature – The mode Up Pumps, will pump down to 1/12 th of an inch. It features a special diaphragm value that prevents water backflow.

Additional Information

Manufacturer: BJM Pumps, LLC

For More Information on the R400D-115 Top Discharge Dewatering Pumps, [Click Here] to Link to Manufacturer Web Site