• Max. Flow: Gpm: 46
• Max. Head: Ft: 27'
• Pump Type: Top or Side Discharge, Chemical Resistant
• Strainer Opening: .25"
• Discharge Size: 1-1/4" NPT-F and 1-1/2" Tapered Hose
• Max. Submerged Depth: 33'
• Shipping Weight:Lbs: 17

• Impeller - Multi Vane: Noryl GTX830
• Rotor Shaft: 304 SS
• External Hardware: 316 SS
• Pumptopcover: Ultramid B3 WG 7
• Pump Handle: Polypropylene

• Motor Rating: Hp: 0.4
• Motor Rpm: 3450
• Motor Insulation Class: F
• Motor Service Factor: 1.1
• Voltage: 115, 1ph-60Hz
• Current F.L.A.: 5
• Motor Protection: Thermal Breaker, 150° C
• Power Cord: Gage; Length: A.W.G. 16/3; 22', SJOOW
• Maximum Liquid Temperature: 135° F Continuous Duty 195° F (intermittent use submerge less than 20 minutes)
• Seal Minder: Not Available

Ideal for pumping everything from contaminated, dirty water, corrosive liquids to light dewatering.

Used in the following U.S. industries:

Metal Plating, Salt Mining, Plumbing, Marine, Agriculture, Aquaculture, Chemical, Rental, Utilities and Fire Departments.

• Virtually unbreakable
• Compact and lightweight. Only 13.5 Lbs.
• Never rusts. Excellent resistance against acids, alkalis.
• Two discharge ports. 1 1/4" inside threaded connection and one 1 1/2" tapered hose connection delivered with each pump.
• Thermal breaker incorporated in motor windings shuts off power before over-heating occurs due to locked rotor or long periods of running dry (150°C). For permanent installation temperature should not to exceed 135°F. For intermittent use submerge less than 20 min. in 195°F maximum.

The GF32-9 and IGF32-9 comes equipped with a fully automatic on/off level switch as standard. The pump is easily installed in a sump. The Perfecta Pump for safeguarding vaults, emptying tanks or pumping out ponds. The unique dual port design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.

Not for use in flammable liquids! Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.

Note: Seal Minder option not available on the Perfecta Pump Series pumps.