SKU / Product Info	Quantity
SX55CSS-208T Current F.L.A. - 23.1
SX55CSS-230T Current F.L.A. - 21
SX55CSS-460T Current F.L.A. - 10.5
SX55CSS-575T Current F.L.A. - 7.6

Quick Overview

The SX55CSS and SX75CSS models have a removable discharge and are able to be mounted on BJM slide rail systems.

Manual Starter Box:

Manual On/Off starter box for SX55CSS-208 = BJM Part# MSB3U195
Manual On/Off starter box for SX55CSS-230 = BJM Part# MSB3U195
Manual On/Off starter box for SX55SSC-460 = BJM Part# MSB3T095
Manual On/Off starter box for SX55CSS-575 = BJM Part# MSB3T095

Auto Starter Box:

Auto On/Off starter box for SX55CSS-208 = BJM Part# MSB3U195-F
Auto On/Off starter box for SX55CSS-230 = BJM Part# MSB3U195-F
Auto On/Off starter box for SX55CSS-460 = BJM Part# MSB3T095-F
Auto On/Off starter box for SX55CSS-575 = BJM Part# MSB3T095-F

Simplex Control Panel - (3 mechanical float switches):

Three Phase control Panel for SX55CSS-208 = BJM Part# AP31AS
Three Phase control Panel for SX55CSS-230 = BJM Part# AP31AS
Three Phase control Panel for SX55CSS-460 = BJM Part# AP31GH
Three Phase control Panel for S55C-575 = BJM Part# AP31GH

Duplex Control Panel - (4 mechanical float switches):

Three Phase control Panel for SX55CSS-208 = BJM Part# AP32AS
Three Phase control Panel for SX55CSS-230 = BJM Part# AP32AS
Three Phase control Panel for SX55CSS-460 = BJM Part# AP32GH
Three Phase control Panel for SX55CSS-575 = BJM Part# AP32GH

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

GENERAL DATA

Max. Flow: Gpm: 450
Max. Head: Ft: 78'
Pump Type: Open Vane Non Clog
Discharge Size: 4" NPT-F
Max. Submerged Depth: 65'
Min. Submerged Depth: 19"
Shipping Weight:Lbs: 251

CONSTRUCTION/MATERIAL DATA

Motor Casing: 316SS
Pump Volute: 316SS
Strainer / Stand: 316SS
Lip Seals & O-Rings: FKM
Rotor Shaft: 316SS
External Hardware: 316SS
Qty. Oil In Seal Chamber: 35.5 U.S. FL. OZ.

ELECTRICAL/MOTOR DATA

Motor Rating: Hp: 7.5
Motor Rpm: 3450
Motor Insulation Class: H
Motor Service Factor: 1.1
Voltage: 208/230/460/575, 3PH-60Hz
Motor Protection: Thermal & Amp Overload
Power Cord: Gage; Length: A.W.G. 10/4; 33', SOOW
Maximum Liquid Temperature: 104° F
Seal Minder: Standard

316 Cast Stainless Steel Pumps with Single Vane Impellers for Municipal, Industrial and Agricultural Waste-Water

The SX-pumps have non-clog, single vane impellers designed for high volume and lift performance.

All wear and "wet" parts such as impeller, wear-plate, oil housing, pump-housing and inner pump top are made of Cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FKM. Standard power cable is made of oil-resistant material. Special installationcan be made with EPDM power-cable and elastomers. (BUNA-N also available).

All parts exposed to pumped liquids are made of 316 Stainless Steel.

Elastomers are made of FKM.

Longer Power Cord – Standard 33ft. power cord.

Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.

More Motor Protection – Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.

Each pump is tested at factory, both for performance as well as safety. Level controls and level control systems are available.

Additional Information

Manufacturer: BJM Pumps, LLC

For More Information on the SX 316 Stainless Steel Single and Double Vane Impeller Pumps SX55CSS-208T, [Click Here] to Link to Manufacturer Web Site