PRODUCT DESCRIPTIONS

Supercizer 5
Use Supercizer 5 to increase slump of concrete by 6" or for a 25% water reduction. Supercizer 5 is formulated to produce stronger, more durable concrete. Supercizer 5 meets ASTM C-494 Type F, AASHTO M-194 and CRD C-97.

Slick-Pak II
Slick-Pak II increases the ease and range of pumpability, while decreasing wear on equipment, horsepower required for pumping, and friction and line pressure. Slick-Pak II minimizes slump and air loss through pump lines, and does not affect ultimate strengths of concrete.

Super Air Plus
Use Super Air Plus when the level of entrained air is below job requirements. Super Air Plus will increase the content of entrained air in concrete by 0.75 to 2%. Super Air Plus meets ASTM C-260, AASHTO M-154 and CRD C-13.

Super Slump Buster
Use Super Slump Buster when low slump is required for proper placing. Super Slump Buster permits controlled slump reduction, allowing placements on inclines or curbs, while minimizing segregation. Super Slump Buster improves finishing characteristics without changing the water-cement ratio.

Standard Delayed Set
Use Standard Delayed Set to retard the set of fresh concrete, in cases when the ready-mix truck has a long distance haul, the truck or other equipment breaks down, or when the temperature at the job site is too high. Standard Delayed Set meets ASTM C-494 Type D, AASHTO M-194 and CRD C-87.

Mini Delayed Set
Use Mini Delayed Set for wash water stabilization, when no washout is allowed at the job site. Use it to retard the set of concrete whenever an unexpected delay occurs. One bag of Mini Delayed Set retards one yard of concrete for one hour. Mini Delayed Set meets ASTM C-494 Type D, AASHTO M-194 and CRD C-87.