Excellent ASHRAE 62.2 solution
ENERGY STAR® certified
Can be used to comply with California Title 24 requirements as well as CALGreen
Can be used to comply with the ventilation standards required by LEED for Homes
Perfect ventilation solution for Weatherization Assistance Program
Integrated motion sensor detects when the room is occupied and turns the fan on. Once the room is vacated, the fan continues to run for a preset amount of time to make sure proper ventilation has occurred. Sensor can be set from 30 seconds to 80 minutes.
Integrated humidistat senses the humidity level of the room and turns the fan on until the humidity level is below the preset percentage. Humidity level can be set up to 80% relative humidity.
8 capacity settings on low speed allow the fan to be set to the required exhaust rate for continuous ventilation. Low speed set points include: 30, 40, 50, 60, 70, 90, 100 & 120 CFM High-speed rapidly clears the air of moisture, odors or other contaminants. High-speed set points include: 80, 110, 130 CFM & Boost
Easily installs using the included adjustable hanging brackets.
UL listed for installation over a tub or shower on a GFCI circuit.
6" round duct connector with gasketed damper protects against backdrafts and seals the duct better than any other damper on the market today.
Side access panel allows you to wire the fan from inside or outside the housing.
HVI Certified performance.