SKU / Product Info	Quantity
3-HTLP60-DCS- Tensile strength at break: 3300 psi (22.8 MPa) Elongation at break: 600 % Hardness, Shore D: 57 Density: 0.97 kg/dm³ A cut piece (pre-cut sleeve and separate closure patch).
HTLP-PP-CLAMP EQ-CLAMP-COIL: induction coil for specific pipe diameter and sleeve width.
HTLP-PP-EQKIT EQ-T0-KIT-BN60-1.5MM: torch with specific nozzle opening. Nozzle Opening: 1.5 MM
HTLP-PP-GENE EQ-GENERATOR-IHG-120-WITH-CABLE: generator for induction coil.
HTLP-PP-HEAT EQ-HEAT-SHIELD-150X3X25M: to protect the PP line coating while preheating the steel area.
HTLP-PP-NOZZLE - EQ-NOZZLE-BN40: for pipe sizes from 3” to 10”
HTLP-PP-SPACE EQ-SPACER-SET: set of spacers to lift up the sleeve during initial installation steps
HTLP-PP-US Peel to primed steel and 3LPP: 10.2 N/mm Peel to primed steel after heat aging: 0.77 Cathodic disbondment: 4.4 mm Impact resistance: 11 J/mm Indentation resistance: 0.9 mm
HTLP80-CLPA Cathodic disbondment: 17 mm radius with S1301-M epoxy Peel to Steel: 40 lbs/in.width Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A closur
HTLP80-CP Cathodic disbondment: 17 mm radius with S1301-M epoxy Peel to Steel: 40 lbs/in.width Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A cut pi
HTLP80-HP-CLPA Cathodic disbondment: < 10 mm radius With S1301-M epoxy Peel to Steel: 6 N/mm Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A closure patch
HTLP80-HP-CP Cathodic disbondment: < 10 mm radius With S1301-M epoxy Peel to Steel: 6 N/mm Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A cut piece (pr
HTLP80-HP-RL Cathodic disbondment: < 10 mm radius With S1301-M epoxy Peel to Steel: 6 N/mm Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A roll (closure
HTLP80-HP-US Cathodic disbondment: < 10 mm radius With S1301-M epoxy Peel to Steel: 6 N/mm Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A Uni-sleeve (p
HTLP80-RL Cathodic disbondment: 17 mm radius with S1301-M epoxy Peel to Steel: 40 lbs/in.width Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A roll (
HTLP80-US Cathodic disbondment: 17 mm radius with S1301-M epoxy Peel to Steel: 40 lbs/in.width Hot water immersion: No delamination, no blisters or water ingress Soil stress creep resistance: 0.003 in ( 0.067mm) A Uni-sl

Quick Overview

Covalence® HTLP60-DCS system is a wraparound heat-shrinkable sleeve which replicates the structure and the performance of factory applied three-layer polyolefin coatings. While curing, the epoxy forms strong mechanical and chemical bonds to the pipe surface & to the copolymer adhesive layer. The cross-linked outer layer forms a tough barrier against mechanical damage and moisture transmission. Features of the product include that it is fully resistant to shear forces induced by soil and thermal movements, it can be sleeve applied over wet epoxy, allowing fast installation and formation of strong mechanical & chemical bonds, it has superior cathodic disbondment and hot water immersion resistance, it fully reconstructs the coating of three-layer coated pipes, and its dimpled backing provides a “permanent change” indicator for application of heat. Benefits of the product include that the HTLP is tough & lasts as long as a 3-layer, factory applied coating, it allows fast application combined with high performance, it offers the optimum barrier protection against corrosion, HTLP systems allow three layer coated pipelines to have a virtually monolithic coating system, and its dimpled backing allows easy post-heat inspection and offers a reliable inspectability at any time. Product comes as a cut piece (pre-cut sleeve and separate closure patch).

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Additional Information

Manufacturer: Covalence Products

For More Information on the Covalence HTLP, [Click Here] to Link to Manufacturer Web Site

Ecommerce Websites, Catalogs, and Marketing Services

We Do Not Sell Products

Covalence HTLP

Covalence Products

Solutions

Products

About Us