Details

USES

CC-309-1WS has been used on both interior and exterior applications where paint, resilient tile or resilient flooring was applied later. Because of the wide variety of paints and adhesives for carpeting and resilient tile in use, contact the manufacturer of the flooring system for application approval over resin-type curing compounds. A small test application is also recommended.

DESCRIPTION

CC-309-1WS water-base concrete curing compound is formulated from hydrocarbon resins and may be used on interior, exterior, vertical and horizontal concrete surfaces. Once applied, it forms a membrane that retains an optimum amount of water present in freshly placed concrete to allow complete hydration of the cement. NOTE: After approximately four weeks, the membrane begins to chemically break down. When the curing cycle is complete, the membrane will eventually wear off the surface. This process usually takes another three to five weeks under normal traffic, UV exposure and weathering conditions.

CC-309-1WS meets the maximum Volatile Organic Compound (VOC) content of 350 g/L for concrete curing compounds as required by the U.S. EPA Architectural Coatings Rule.

PACKAGING

5 Gallon (18.93 L) Pails
55 Gallon (208.20 L) Drums
275 Gallon (1040.99 L) Totes

COVERAGE

Approximately 200 ft²/gal. (4.91 m²/L)

SPECIFICATIONS

ASTM C 309, Type 1, Classes A & B (Type 1-D also available)

Additional Information

Manufacturer: W.R. Meadows