• Max. Flow: Gpm: 95
• Max. Head: Ft: 48'
• Pump Type: Open Vane Non Clog
• Discharge Size: 2" NPT-M
• Max. Submerged Depth: 65'
• Shipping Weight:Lbs: 69

• Motor Casing: 316SS
• Pump Volute: 316SS
• Strainer / Stand: 316SS
• Lip Seals & O-Rings: FKM
• Rotor Shaft: 316SS
• External Hardware: 316SS
• Qty. Oil In Seal Chamber: 10.1 U.S. FL. OZ., SHELL FM 32, NSF APPROVED
• Qty. Oil In Motor Stator: 48 U.S. FL. OZ., OIL-FILLED W/ SHELL FM 32, NSF APPROVED

• Motor Rating: Hp: 1
• Motor Rpm: 3450
• Motor Insulation Class: R
• Motor Service Factor: 1.1
• Voltage: 208/230/460/575, 3PH-60Hz
• Motor Protection: Thermal Sensor Switches Embedded in Each Winding Phase
• Power Cord: Gage; Length: A.W.G. 16/4; 33', high temp. rated
• Maximum Liquid Temperature: 200°F
• Seal Minder: STANDARD

316 Cast Stainless Steel Pumps with Single Vane or Double Vane Impellers for Municipal, Industrial and Agricultural Waste-Water. Side discharge and non-clog single vane impellers for the passing of solids while delivering high volume of liquid.

The SXF-pumps have non-clog, single vane impellers designed for high volume and lift performance.

All wear and "wet" parts such as impeller, wear-plate, oil housing, pump-housing and inner pump top are made of Cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FMK. •All parts exposed to pumped liquids are made of 316 Stainless Steel.

• Elastomers are made of FMK.
• Longer Power Cord – Standard 33ft. power cord.
• Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
• More Motor Protection – Winding protection and (NEMA) Class R motor insulation with a thermal cuto out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.