Fahrenheit Pumps - handles liquids up to 200 degrees F. 316 Cast Stainless Steel pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water The BJM Shredder Pump model SKX08CSSF is not recommended for unscreened sewage. It does not have enough torque to handle solids such as Tampons, Applicators, Sanitary napkins, Paper Towels (bunched), or other similar materials. BJM Pumps recommend that a 2HP or larger is used in unscreened sewage. Choosing the right pump for your particular application is very important. If for any reason you are not familiar with the general rules of sizing a pump or system please contact our Technical Services Department or our nearest distributor for help and guidance.
Shredder Pumps 316 Cast Stainless Steel Pumps with Shredder Action Impellers for Municipal, Industrial and Agricultural Waste-Water. Side discharge and non-clog single vane or double vane impellers for the passing of solids while delivering high volume of liquids. The Shredder (SKXF) pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate. All wear and "wet" parts such as impeller, wear-plate, oil housing, pump-housing and inner pump top are made of Cast 316 stainless material. The elastomers such as o-rings, lip seals and gaskets are made of FMK.