SF Solids Handling Pumps S08CF-208T | 48WS

Ecommerce Websites, Catalogs, and Marketing Services

We Do Not Sell Products

 
 
BROWSE CATEGORIES
 

Search:

SF Solids Handling Pumps S08CF-208T

BJM Pumps, LLC

(click image to enlarge)
SKU / Product InfoQuantity
S08CF-208T
Current F.L.A. - 3.5
S08CF-230T
Current F.L.A. - 3.2
S08CF-460T
Current F.L.A. - 1.6
S08CF-575T
Current F.L.A. - 1.3
 
Quick Overview
    Simplex Control Panel:
    • Three Phase control Panel for S08CF-208 = BJM Part# AP31CH
    • Three Phase control Panel for S08CF-230 = BJM Part# AP31CH
    • Three Phase control Panel for S08CF-460 = BJM Part# AP31AH
    • Three Phase control Panel for S08CF-575 = BJM Part# AP31AH

    Duplex Control Panel:
    • Three Phase control Panel for S08CF-208 = BJM Part# AP32CH
    • Three Phase control Panel for S08CF-230 = BJM Part# AP32CH
    • Three Phase control Panel for S08CF-460 = BJM Part# AP32AH
    • Three Phase control Panel for S08CF-575 = BJM Part# AP32AH

    Note: Seal Minder relay and high temperature floats must be ordered for panels being used with high temperature pumps. Heat sensor connectors are standard on all panels.

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.
Details
GENERAL DATA
  • Max. Flow: Gpm: 95
  • Max. Head: Ft: 48'
  • Pump Type: Open Vane Non Clog
  • Discharge Size: 2" NPT-M
  • Max. Submerged Depth: 65'
  • Shipping Weight:Lbs: 69

CONSTRUCTION/MATERIAL DATA
  • Motor Casing: 304SS
  • Pump Volute: Cast Iron
  • Strainer / Stand: Cast Iron
  • Lip Seals & O-Rings: FKM
  • Rotor Shaft: 304SS
  • External Hardware: 304SS
  • Qty. Oil In Seal Chamber: 7.8 U.S. FL. OZ., SHELL FM 32, NSF APPROVED
  • Qty. Oil In Motor Stator: 32 U.S. FL. OZ., OIL-FILLED W/ SHELL FM 32, NSF APPROVED

ELECTRICAL/MOTOR DATA
  • Motor Rating: Hp: 1
  • Motor Rpm: 3450
  • Motor Insulation Class: R
  • Motor Service Factor: 1.1
  • Voltage: 208/230/460/575, 3PH-60 Hz
  • Motor Protection: Thermal Sensor Switches Embedded in Each Winding Phase
  • Power Cord: Gage; Length: A.W.G. 16/4; 33', high-temp rated
  • Maximum Liquid Temperature: 200°F
  • Seal Minder: STANDARD

Electric Submersible Pumps with Single Vane or Double Vane Impellers for Municipal, Industrial and Agricultural Waste-Water

The SF-pumps have non-clog, single vane or double vane impellers designed for high volume and lift performance.

  • Longer Power Cord – Standard 33ft. power cord.
  • 304SS Motor Housing – Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
  • Three Seal Motor Protection - Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
  • More Motor Protection – Winding protection and (NEMA) Class R motor insulation with a thermal cut out switch that will allow the stator to have a winding temperature of up to 300 degrees F (150 C), superior to pumps with Class A and B insulation.
  • Tough Pump Construction – Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components.
    • Additional Information
    Manufacturer: BJM Pumps, LLC
    For More Information on the SF Solids Handling Pumps S08CF-208T, [Click Here] to Link to Manufacturer Web Site
     
    Facebook LinkedIn YouTube
     
    © 48WS®.com LLC. All Rights Reserved
     
    Powered by 48WS.com