DESCRIPTION

CERTI-VEX COATING REPAIR will effectively re-cast an existing coating correcting application imperfections, such as bubbles and over applied thick coatings. Its controlled evaporation rate allows the coating to properly dry. Once corrected, the coated floor will have a uniform appearance.

BENEFITS

• Slower evaporation rate than Xylene or Toluene.
• Enhances uniform film formation.
• Can be used on solvent and waterbased coatings.
• Slower evaporation rate helps keep film open to minimize air bubble formation.
• Reduces cob webbing.
• Non-Red Label.

APPLICATION

• Apply with an Evenflow Applicator or ¼ "nap mohair roller.
• Use a roller pan to remove excess Coating Repair material from the roller.
• Do not dip and roll or pour and spread.
• Apply a thin amount to the affected area in a lapping motion to re-dissolve the surface film of the coating; it will re-dissolve the film, blending air bubbles and film imperfections.
• Heavy applications of sealer may require another treatment.
• Leave dry overnight with good ventilation before using floor.

SPECIAL NOTES

• May affect some surface areas if splashed.
• If coating needs to be removed use Certi-VexConcrete Stripper or StarSeal Envio Strip

WARNING

When used, the material may be classified a hazardous material for purposes of disposal. This material should be kept in a separate container and local, state, federal rules for disposal must be followed. Contact Vexcon if additional questions and/or information is required and consult the Material Safety Data Sheet

PACKAGING

Certi-Vex Coating Repair is available in 55-gallon drums, 1-gallon pails and 1-gallon containers. Contact Vexcon to discuss your customized packaging requirements.

VITAL STATISTICS

HEALTH AND SAFETY

• Caution, slippery when applied. Use care when walking. Spread sand for traction.
• Use only with adequate ventilation.
• Use of gloves, goggles and other protective clothing is advised when using this product.
• If swallowed, do not induce vomiting.
• Aspiration of materials into the lungs can cause chemical pneumonitis, which can be fatal.
• Use of respirators is advised when using this product in confined areas.

Vexcon MSDS is an integral part of the safety and application of our product. A short synopsis is provided in this product data sheet. Before using this Vexcon product obtain a copy of the MSDS from your distributor or by contacting Vexcon Chemicals.