DESCRIPTION

CERTI-VEX CONCRETE RUST & STAIN REMOVER quickly and effectively removes rust stains as well as hard water scaling and efflorescence from concrete, decorative rock and stucco. Also removes leaf, grass and berry stains

BENEFITS

• Meets VOC regulations
• Removes leaf, grass, berry and rust stains
• Use on landscape rock and retaining walls
• Removes fertilizer rust stains
• Use to clean all concrete surfaces

SPECIAL NOTES

• Avoid direct contact of plant leaf surfaces with this product as it may temporarily defoliate plants

PROTECT

After thorough cleaning, finish your surface with one of Vexcon’s premium concrete protection products. Contact Vexcon for product recommendations

APPLICATION

• Spray Certi-Vex Concrete Rust & Stain Remover full strength directly on to the stain.
• Allow to soak for 1 to 3 minutes.
• Re-spray and agitate with a non-metal brush, abrasive pad or rag. For small areas, blot off rust with an absorbent towel or rag.
• Re-apply and agitate again as needed.
• Rinse area with clean water and neutralize with Vexcon Certi-Vex Neutralizing Rinse.

PACKAGING

This product is available in quarts and gallons

HEALTH AND SAFETY

This product is acidic. Concentrate has a pH of 3. It will redden (not burn) the skin and is a contact irritant to the eyes. It is advised that standard good work practices be followed at all times on all jobs to include gloves, eye and clothing protection when there is the possibility of eye contact or prolonged skin contact. See MSDS #OP109 for full safety information.

FIRST AID

• Eye: Flush thoroughly with clean water
• Skin: Wash with warm , soapy water
• Inhalation: Remove to fresh air
• Ingestion: Consult a physician immediately