Crowcon's NEW and ENHANCED Gasmaster Control Panel has a modular design meaning users only need purchase the required number of input modules. It can easily be extended by adding more modules at a later date.

(click image to enlarge)

Quick Overview

Overview

The Crowcon Gasmaster is a compact, versatile and powerful gas detection control panel that combines simple operation with an extensive array of input and output functions.

Crowcon Gasmaster provides all the information you need about your gas and fire detectors at a glance. The large multi-lingual display shows gas levels from all detectors simultaneously and enables system adjustment and testing using buttons on the front panel. Crowcon Gasmaster can operate ‘stand-alone’ or interface with any alarm devices and control systems using a selection of outputs.

Large display

All gas levels are displayed simultaneously - enables full systems status check at a glance
Alarm messages can be customised to indicate the name or location of any detector in alarm
The LCD can be set to display in many languages

User-friendly

Menu system is intuitive and easy to use - enables configuration changes to be made easily
All functions, from day-to-day operation to re-calibration, can be carried out from the front panel - routine testing can be performed rapidly
Event log feature - enables system fault and alarm history to be viewed

Versatile input and output features

Provides analogue, relay and Modbus outputs - facilitating communication around the site
Flexibility - Gasmaster can monitor up to four detectors in virtually any combination of gas detectors, fire zones or Environmental Sampling Unit*. Software enables re-configuration and event log upload in an instant**
Two levels of independent alarm per channel - can be configured to suit site requirements
Remote inhibit and re-set facilities - enables control from any point on your site
Compatible with a 4-20mA or mV pellistor-type gas detector - mV pellistor detectors reduce system purchase and maintenance costs

Modular design

You only need to purchase the required number of input modules - 1,2 and 3-channel systems can be extended later by adding additional modules***

* Contact Crowcon for details

** Event log access requires optional PC communications kit
*** Gasmaster 4 only

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

	Gasmaster 1	Gasmaster 4
Size	288 x 278 x 110mm (11.3 x 10.9 x 4.3 inches)
Weight	4.5kg (10lbs)
Enclosure material	Back-box: cast aluminium Front cover: ABS (flame retardant)
Ingress protection	IP65
Power	100-240Vac 50-60Hz or 20-30Vdc, 60W max
Battery back-up	1.2Ah batteries fitted internally
Operating temperature	-10°C to +50°C (14°F to +122°F)
Inputs	Gas One 2 or 3 wire 4-20mA gas detector (sink or source) or mV pellistor flammable gas detector	One to four 2 or 3 wire 4-20mA gas detectors (sink or source) or mV pellistor flammable gas detectors
	Fire One loop of up to 20 conventional smoke/heat detectors or manual call points, or one flame detector (4-20mA or digital contact signal)	One to four loops of up to 20 conventional smoke/heat detectors or manual call points, or one to four flame detectors
	ESU For use with one Crowcon ESU fan
	Remote inhibit/retest Via normally open contact
Outputs	Relays DPCO contacts rated 250Vac 8A Low alarm. High alarm. Fault. Alarm relays can be set for rising or falling alarms. Hysteresis can be adjusted on low alarms	Low alarm and high alarm per channel plus common low, high and fault. Alarm relays can be set for rising or falling alarms. Hysteresis can be adjusted on low alarms
	A/V alarm drive 12Vdc or 24Vdc 650mA max. drive. Suitable for +ve or -ve switched alarms
	Analogue 4-20mA (current source, max. loop resistance 700?) or 1-5Vdc (min. load 50k? )	4-20mA for each channel (current source, max. loop resistance 700?) or 1-5Vdc (min. load 50k?)
	Serial link RS-485 Modbus RTU for monitoring and control via DCS/SCADA/PLC systems
Communications port	Optional port for PC configuration and event log upload
Event logging*	Time-stamped log of up to 300 alarms, fault or system intervention activities
Panel indication	LCD back-lit display shows gas level (in ppb, ppm, % volume or % LEL units), and scrolling alpha-numeric status indication. LED’s for Alarm, Fault, Power and Warning. Integral 85dB sounder (at 10cm)
Approvals	EMC: EN50270, EN60945, FCC Part 15, ICES002 ATEX: EN60079-25:2010
Functional safety	Validated to IEC61508 SIL2