TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A very wide choice of sensors are available for use in a variety of applications. TXgard-IS+ is ATEX certified for use in Zone 0,1 or 2 hazardous areas and also UL and cUL certified for use in Division 1 or 2 hazardous areas.

(click image to enlarge)

Quick Overview

Non-intrusive calibration

Calibration can be performed locally without the need for hot work permits - minimises operational down-time
Local display and buttons enable calibration without opening the junction box

Flexible output options

4-20mA current sink - works with a wide selection of control panels
2 wire format

Rugged and reliable

Made from tough carbon loaded nylon
Ingress protection to IP65 as standard

Low cost of ownership

Non-intrusive one man calibration - easy to operate and maintain
Long life sensors - keeps interuption to on-site activity to a minimum
Simple parts replacement

Wide range of sensors

Extensive range of electrochemical sensors for toxic gases and oxygen

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

Size	160 x 123 x 92mm (6.3 x 4.8 x 4.5ins)
Weight	0.7kg (1.5lbs)
Ingress protection	IP65
Enclosure material	Junction box: Carbon loaded nylon Sensor housing: ABD Plastic
Power	8-32Vdc, 4-20mA loop-powered
Cable entries	1 x M20 or 1/2” NPT with adaptor
Operating temperature	-20°C to +55°C (-4°F to 132°F) *
Humidity	15 to 90% RH non-condensing
Display	2-Line, 16 character LCD
Calibration method	Via push-buttons
Electrical output	2 wire 4-20mA
Terminals	Suitable for up to 2.5mm2 cable
Sensor type	Electrochemical
Repeatability	+/- 2% FSD typically
Zero drift	+/- 2% FSD, 6 months typically
Response time	Contact Crowcon for a full list of sensor response times
Performance	Tested in accordance with EN60079-29-1
Hazardous area zones	Zone 0, 1 or 2 Division 1 or 2 (when connected via an isolation device)
Approvals	Ex II 1 G Exia IIC T4 Ga UL Class I, groups A, B, C and D
EMC compliance	EN 50270, FCC, ICES-003