Flannery's Aluminum Universal Weep Screed (Patent #5,630,297) is an extruded vinyl product. It serves as a typical weep screed with a unique benefit. The benefit to the Vinyl Universal Weep Screed is the longer return flange on the bottom of the screed, which allows for a tight fit against concrete foundations. Standard weep screeds have a shorter return leg, which can be an issue when installed over steel or wood framed buildings that utilize wood sheathing. Typically, framing members are set at the edge of the foundation and the sheer panels are fastened to the framing. This then creates a gap between a typical weep screed and the concrete foundation. By lengthening the lower return leg, the Universal Weep Screed rests firmly against the concrete foundation eliminating the possible gap.

(click image to enlarge)

Quick Overview

Attach Vinyl Universal Weep Screeds to the framing with nails, screws, or other approved fastening methods. Attach the bottom edge of the Universal Weep Screed no less than 1" below the joint formed by the foundation and framing. The nose of the screed must be no less than 4 inches above raw earth or 2 inches above paved surfaces. The weather resistive barrier (two layers of building paper required if plywood sheathing is used). and lath must entirely cover the vertical flange and terminate at the top edge of the nose or ground flange (per ASTM C 1063, Sec. 7.11.5).

Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Additional Information

Manufacturer: Flannery, Inc

Ecommerce Websites, Catalogs, and Marketing Services

We Do Not Sell Products

D. Vinyl Universal Weep Screed

VUWS

Flannery, Inc

Solutions

Products

About Us