Details

PREPARATION Concrete surfaces must be cleaned and profiled to the recommended ICRI - CSP 1 - as specified in Guideline No. 310.2-2013 (formerly 03732), Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, and Polymer Overlays. The surface must be free of sealers, dirt, oil, paint, moss, dust and other contaminates and must be open and porous to accept the Antique-It. Proper and complete substrate preparation is critical to the success of the project. Surface preparation videos available at www. brickform.com. APPLICATION Pour one gallon of water into a five gallon pail, add 6 ounces of Antique-It powder and mix vigorously until all powder has dissolved. Pre-wet the slab to be treated. Dip a soft bristle brush in the Antique-It solution and agitate the product. Remove the brush and allow the solution to fall out of the brush and on to the slab. Move the product around to even the coverage and to allow the color to settle in the imprints. Continue the process of dipping the brush, agitating the mix and applying the product across the slab. Water can be sprayed on the product while it is still wet to dilute the color as needed. The ratio of water to powder can be increased or decreased depending on the desired intensity of the color.

Additional Information

Manufacturer: Starpatch Concrete Products