Interested in this item or want more information?
Call Mon. through Fri. 8:00 AM - 5:00 PM PST
Phone: 714-573-4083
Email: sales@48ws.com

Can't find what you want? Give us a call and we can help you find it.

Details

MasterEmaco ADH 612

Hybrid, high-performance adhesive anchoring system?

How does MasterEmaco ADH 612? work?

MasterEmaco ADH 612 is a two-component, code compliant, high-performance adhesive anchoring system tested to ACI 355.4 and ICC-ES AC318. The silane-cementitious hybrid formulation is a 3:1 mix ratio by volume providing outstanding performance with a wide installation temperature range between 5 to 104 °F (-15 to 40 °C).

Recommended uses:

Structural steel anchoring columns, beams, trusses, racking, rails & barriers
Retro-fitting and bracing reinforced concrete buildings subjected to earthquake displacement to resist deformation and wind resistant to resist elastic forces
Threaded rod and reinforcing bar (rebar) into cracked or uncracked concrete
Vertical down, horizontal, upwardly inclined and overhead installations
Dry and water saturated concrete conditions

What are the unique features of MasterEmaco ADH 612??

ICC-ES ESR-3770 evaluation report for cracked and uncracked concrete
Florida Building Code (FBC) Compliant: 2014 and 2010
Certified - Drinking Water System Components (NSF/ANSI 61) Joining and Sealing
Service temperature range under short term loading conditions between 5 to 302 °F (-15 to 150 °C)
Resists static, wind and earthquake loading in tension and shear (IBC Seismic Design Categories A – F)
Full cure in 45 minutes at 77 °F (25 °C) Resists sustained loads up to 194 °F (90 °C)
Withstands freeze-thaw conditions
Non-sag consistency for anchoring in any orientation

What are the benefits of MasterEmaco ADH 612*??

Resists static, wind, and earthquake loading in tension and shear.
Anchoring in all seasons, for dry and water-saturated concrete conditions. Withstands freeze and thaw conditions.
Vertical, horizontal and overhead installations.

* Certified - Drinking Water System Components (NSF/ANSI 61) Joining and Sealing

Additional Information

Manufacturer: Master Builder Solutions